Contact
-
50 Carriage Hill Lane
Laguna Hills, CA 92653 - (714)955-9006
-
al.siroon@miraclesteels.com
m.siroon@miraclesteels.com
Catalog
Area of Use
It is used in many application areas to ensure protection against corrosion and to extend its lifetime.
Galvanizing Method;
Automatic Hot-dip Galvanizing
Pre Galvanizing
Hot-dip Galvanizing Standards |
|
| Standarts | |
| EN 10240 (TS 11348 EN 10240) | |
| ASTM A123M | |
| TS EN ISO 1461 | |
Production Range |
|
| Automatic Hot-dip Galvanizing | |
| Outside Diameter | 20×20 – 100×100 mm |
| Wall Thickness | 2,0 – 7,11 mm |
| Length | 5,0 – 8,0 m |
| Pre Galvanizing | |
| Square Hollow Section | |
| Outside Diameter | 20×20 – 125×125 mm |
| Wall Thickness | 1,0 – 3,0 mm |
| Length | 4,0 – 13,0 m |
| Rectangular Hollow Section | |
| Outside Diameter | 20×30 – 80×160 mm |
| Wall Thickness | 1,0 – 3,0 mm |
| Length | 4,0 – 13,0 m |
Production Matrix
Galvanized Sheet Standard |
|
| Galvanized Sheet Standard | Steel Grade |
| ASTM A653 | CS TYPE B |
| EN 10346 | DX51D+Z |
| EN 10346 | DX52D+Z |
| EN 10346 | DX53D+Z |
| EN 10346 | DX54D+Z |
| EN 10346 | DX56D+Z |
| EN 10346 | HCT590X |
| EN 10346 | HX260LAD+Z |
| EN 10346 | HX300LAD+Z |
| EN 10346 | HX340LAD+Z |
| EN 10346 | HX380LAD+Z |
| EN 10346 | HX420LAD+Z |
| EN 10346 | S220GD+Z |
| EN 10346 | S250GD+Z |
| EN 10346 | S280GD+Z |
| EN 10346 | S320GD+Z |
| EN 10346 | S350GD+Z |
| EN 10346 | S420GD+Z |
Note: Galvanized steel sheet coating thickness 40 – 350 gr / m2